-
Ceiling single and floor poles don't seem to be working. They show as not connected and power isn't getting through them.
-
The [v0.3 schematic](https://github.com/upsidedownlabs/DIY-Muscle-BioAmp-Shield/blob/246f3930c243b1b6c6bb2c072473f4f3b4606c19/graphics/board/Schematic.png) describes the active filter as a `BandPass f…
-
The following code for stacking coffins does not behave as expected, note that the `B` and `T` handles of the resulting coffin are incorrect. To get the expected outcome required some trickery with co…
-
When moving near the poles in Cesium view, the ol3 map becomes really small and the application is no more responsive. The browser then propose to kill the script.
-
I think they should be smaller poles like [this](http://c8.alamy.com/comp/A24JCY/telegraph-pole-carrying-power-and-telephone-lines-detail-uk-A24JCY.jpg)
The poles should be thinner, and can only ca…
-
### Feature request
Although the BLH_Poles works well for configurations with exactly the same motors, some setups may use different motors with different poll counts. As such, I request adding to …
-
Electrical age should have Tier 3 Lines and poles added, in real life there are power lines that carry hundreds of thousands to millions of volts.
since the tier two poles are about 10 blocks high…
-
Hi @matlabbe
I usually use RTAB-Map with a 3D LiDAR and wheel odometry to build indoor maps. However, I am starting a new project to build an outdoor map, similar to the video published by RTAB-Ma…
-
When aligned on a pixel off-center from the camera image, the chart rotation appears incorrect when the celestial pole is between the geometric center of the camera image and the target pixel.
Tetr…
-
> What application are you using?
Street Banner Program Portal
> Describe the problem.
please assign to David G. or Grant.
Attached document shows all approved poles by AE that will need to be…