-
Hi all,
Sorry for this stupid question, I'm new to Embedded Rust. I'm trying to use this HAL crate with RTIC together to implement a UART-LoRa modem. But so far I just couldn't figure out this issu…
-
Hi,
I followed the[ instructions](https://github.com/hallard/LoRa-E5-Breakout) to use the LoRa E5 with Mbed Studio. But I am getting this error.
`++ MbedOS Error Info ++
Error Status: 0x80FF014…
-
Hi @danak6jq !
First, I want to thank you for such an amazing contribution.
I tested the original example on the STM32 Nucleo board and worked like a charm (as it should be), then, I was able to se…
-
Unable to pull lib as the gitlab server requires a password.
-
Hi Dana,
Quick "interrupt" :-) Thanks for the great code. Much appreciated. I'm currently using the RAK3172 on the RAK5005 with an SHTC3 temp/humidity sensor. All my LoRaWAN functions work with…
-
Hi
Does someone have already tried to port the LoRaMac-Node stack to the RAK3172 module. It uses an STM32WLE5 chip.
I would to use the RAK with a custom firmware.
BR
Gilberto
-
RAK3172 is nearly identical to the LoRa-E5, differing only in the GPIOs used for antenna control. A simple change to the BSP driver will suffice. Need hardware to test on.
-
I try to compile an espidf / Arduino project with PlatformIO (`v2.3.4`) and VS Code (`1.61.2`) on a Windows OS (10) and I got this error during the linking stage:
```
Tool Manager: Installing tool…
Kampi updated
2 years ago
-
**Describe your question or issue**
I use the current version of the MCCI LoRaWAN library with an ESP32 MCU. As far as I observed it correctly the library is waiting around 1 minute between each jo…
Kampi updated
2 years ago
-
I am attempting to use The Things Uno with the Asian 920-923 range, however
I am getting the errors:
```
...
Data Rate: 3
RX Delay 1: 1000
RX Delay 2: 2000
-- JOIN
Model: RN2903
Version: 0.9.…