-
We need to have a C# file that is able to correctly mimic the behavior of the LSM6DSO IMU [(Link to Datasheet here)](https://www.st.com/en/mems-and-sensors/lsm6dso.html). This needs to utilize the Ren…
-
I have the Airgradient-One version sold prior to the most current one with the LED strip. Would any of the configs be applicable for my model? I took a look at a couple of them and the 8266 based ones…
-
## Extend _support_ to include the _Sensirion SCD40 compact photoacoustic NDIR CO2 sensor_.
**Tasks:**
- understand features, examples,
- test available drivers,
- write, validate IoTempower bridge…
mbz4 updated
4 months ago
-
In case you were curious I've just recently made a similar module for the new SHT31 sensor, and tested it on raspberry pi 2 model b.
I'm posting here in part to give credit here; since I used your SH…
-
Hi there,
I wish to create sub categories in the root, I did not find any docu for that.
I would like to do it like this, sensors is a root:
```
sensors
- dht11
-- temperature
-- humidity…
-
Hallo Jason2866,
Ich habe mal einen Shelly Plus H&T nach der Anleitung geflasht, Tasmota läuft.
Wie ich dann auch mitbekommen habe, gibts noch kein Template.
Glaube auch, das noch die Display Drive…
-
micro:bit , RPi用の*.jsのドライバ*1を開発している範囲ではmjsという拡張子のコードは使わないので、よくわかりません。コードを見てみると、ほとんど同じなので、どちらかから自動生成しているように見えるのですがよくわからないので説明を。
*1から何か自動的にmjsが生成できるのならばあまり気にはなりませんが、逆にmjsを作らないとjsを登録できないとかになりますと、私の開発ス…
-
I updated the ESPHome plug in, and then updated all the ESPHome devices on my network, and now the temperature and humidity go to "unknown" or "NaN"
I have tried both the sht3xd and sht4x platforms…
-
### The problem
I am converting all my ESP nodes from Arduino to ESP-IDF and ran into an unexpected issue with the SHT3xD sensor. The issue is present on all my nodes that use that sensor and acros…
-
This is a hefty ticket that utilizes the Sht30 (temp monitor) driver in `Embedded-base` repo. Using the APIs of this driver, add internal temp monitoring to our segement interface, and create a new fa…