-
Setting up the various modules for @sbender9 page at https://github.com/sbender9/wilhelmsk-node-server-setup, and after enabling the modules and setting the correct IDs, SignalK exited with the error …
-
Note on cmdline out at server startup.
-
This repo (as well as the `server-signalk` repo) was created by cloning the [signalk-server-node](http://github.com/signalk/signalk-server-node) project and then simplifying by removing unnecessary fi…
-
The signalk synchronization, set up through the zeroconf facility, does not seem to take the track timestamp into consideration. When you switch **off** an active route in opencpn, the data that was d…
-
Pulling engine data from an MAN engine, runs through a maretron J1939-N2K converter, out puts N2K pgn 127489.
My signalK data sources is showing coolant pressure to be 120000000, which I believe is…
pbegg updated
6 months ago
-
Dockerized version
SignalK
https://signalk.org/installation.html
-
Hello, I have installed the plugin from signalk , but I dont know to make it work...
My objetive is to send data that I have in signalk to the NMEA2000 net so I can see the Data using a B&G displa…
-
Hey guys,
Im trying to add 1wire DS1820B sensors to SignalK via ESP32. I have my board put together, new sensor is registered (i also have INA219 voltage sensors) and i used some examples to put to…
-
I have an issue with the B&G wind speed data in SignalK. While the data is presented to a resolution of 2 decimal places, it appears that the resolution is actually around 0.6 m/s. In calm conditions,…
-
TypeError: (0 , server_api_1.hasValues) is not a function
at /home/node/.signalk/node_modules/signalk-to-influxdb2/dist/plugin.js:99:56
at FullSignalK.onDelta (/home/node/.signalk/node_modul…