-
Hello.
I made a cnc machine with an Arduino Uno & a CNC Shield V3. Everything working like a charm.
But, I'm actually trying to connect my esp 32 to the RX & TX pin in order to get a Serial commun…
-
Installed v1.0.22 and when I go to run it it gives me a error I hope this error log is what you need to see.
01:40:51 M: 26001408 WARNING: -->Python Initialized
-
There is another question that we need to resolve before we can finalise the JSON-LD NDR - which is the question of vocabulary architecture / granularity.
- is it all one huge vocabulary including …
-
First, is there a proper discussion forum (Discord, Slack, etc.) for questions that may not be an "issue"?
To make a long story short, I’ve converted a mini mill to CNC. I still want to manually co…
-
### Wiki Search Terms
Soft limit error. ALARM:2 Soft limit alarm.
### Controller Board
Xpro V5
### Machine Description
Ultimate Bee 1515 220v 2.2kw water cooled spindle.
### Input Circuits
_N…
-
### Wiki Search Terms
Homing/homing cycle/seek_mm_per_min
### Controller Board
6-pack, v1p5
### Machine Description
The axis I am trying to run is using an external stepper motor driver. The moto…
-
Hi All,
I have read through multiple threads but it seems that I'm reporting something new/unseen so far.
My Setup is Eleksmaker Mana SE v3.2 + grbl1.1g, I have upgraded X - Stepper Driver, and …
-
### Controller Board
MKS DLC32 V2.1
### Machine Description
Gantry router, XYYZ, external drivers DQ542MA ,Huanyang spindle - RS485 controlled using generic 485 board connected to display headers o…
-
@gdower, would it be possible to unify presentation of subgenera in CoLDP from different source chjecklists?
Subgenera now appear **as uninomials** in _Systema Dipterorum_ & _ITIS_ (e.g. [Abacanth…
-
Hi , First off Thanks to GRBL Software Engineers for a great bit of Control Software
My Set Up : I am Running GRBL 1.1f on a Mega 2560 - Was Programmed using the Hex File Method.
I Connect to G…