-
Dear Tatemazer,
I would really like to copy your build and apply it to my La Spaziale Vivaldi S1 and to a Bezzera Bz07 from a friend. And maybe building some DIY scale as well to save money :) Thi…
-
Is there experimental support anywhere in Infinitive for WRITING directly to the registers of something like a FE4A fan coil to do things like:
* Directly control the fan coil's blower speed. Given…
-
Current corner servo-to-board connection uses 2.54mm pitch DuPont connectors, which provide no mechanical connection/locking aside from friction and the spring tension of the female connector. The use…
-
There were some spurious errors while reading ONFI-like NAND with revB, it's unclear if they were caused by FXMAs or something else.
-
While in Blheli32 suite when a lipo is plugged in the motors spin erratically with Bidirectional Dshot
when Bidirectional Dshot is disabled its fine but esc has bad input frames
tekko32_f3_c metal 4…
-
Installed Ratgdo on two garage openers:
1. Newer Sec+ 2.0 door and works perfectly
2. Older Sec+ 1.0 door and it stops after 1/2 second either opening or closing which is baffling me on how to get…
-
Hello there,
I just build my first wolf pdb setup with a brand new board and a Kiss FC V1. After updating all firmwares (Kiss on 1.3RC36 Stable and the latest OSD firmware) and do all settings (Dummy…
-
Hello, hope everyone is staying safe. I love my apex, I have the Mr.Steele version. I flew about 20 batteries with the stock settings not realizing my VTX was at 25mW. Once I switched my VTX to 500mW…
-
Test axis and plunger motors and their limit switches.
(Won't test the multi-channel side)
-
It would be nice to have an output and/or input for some form of EDA type netlist, whether in SPICE type format, Protel/Altium format, Kicad format, eagle format, etc.
If people want this feature…