-
Hi,
I was using Yun in a project, As Yun uses Atmega32u4 whose SPI pins are on ICSP header not on D13,D12,D11.
But When I wire the ICSP to SPI Module, I see D13,D12,D11 highlighted, which should…
-
Hi there,
Just tried this core on the Tang Nano 20k for the first time, and I noticed that the demo "Sea of Colour" just shows a black screen, while audio seems to play.
Here is the demo in ques…
-
I want to thank a lot the autor M Suat Özgür for your work that a very very good job .
I have put your link in my website
http://misterdroid.ma/misterdroid/wigoHome.html
I have some question i…
-
Hello everyone,
I'd like to implement https://www.prusaprinters.org/prints/7499-prusa-mmu2-moving-filament-passage-22mm-ikea-plats, but the cables between the MMU2S and the MK3S are too short. What…
-
**[ ID ]** 86d5eda0-1461-42bf-990c-9b7d881d884a
**[ Submitter's Name ]** Tina Götschi
**[ Submitter's Affiliated Organisation ]** Ada, the National College for Digital Skills
**[ Submitter's Twitter …
-
Hello, I've connected arduino nano with logic level shifter and this is the message I'm getting, when connecting to serial interface of the arduino. The wheel is acting weird, sometimes it would keep …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
_From @chrisyokum on June 4, 2015 7:12_
The Raspberry Pi 2 header pin numbers are incorrect. Take a look at http://pi.gadgetoid.com/pinout. In the Fritzing the top-left pin (furthest from the Etherne…
-
ATmega328P
- [ ] Leer datasheet
- Use bypass capacitors (100nF) near the MCU's VCC and GND pins to reduce noise and ensure stable power delivery.
- For bootstrapping the custom Arduino …
-
Hello,
Lately I've been trying to install the provided code on a D1 mini with a PN532 board. In the past, I have been successful on breadboard but now that I want to use a more permanent package (u…