-
Please create and maintain an old version repository, such as OpenLRS does, to allow using older versions of the Chrome Config and firmware for those who do not want the forced update...which often re…
-
I tried everything but I could not get the tail servo working at all (No signal)
My setup:
Flip32 (same as Naze32)
Receiver connected with PPM (Gui see it working correct)
Motor connected to OUT1,…
-
CF 2.0.0-RC2 is out now.
https://github.com/cleanflight/cleanflight/releases/tag/CLFL_v2.0.0-RC2
Please leave bug reports/testing feedback as comments below.
hydra updated
7 years ago
-
Hi guys, in upgrading from 3.1.7 to 3.2 RC4 and RC5, the LEDstrip has become inactive on my Bluejay F4 R4 boards.
Curiously when using BLHeli to flash ESCs, the LED strip lights up, and it also g…
-
Hi there
I have updated on the latest cleanflight version 2.x.
I wasn`t happy with this version so I flashed the older version on my Naze32 and the older version on my laptop. Since then I have no…
-
Hello,
I have scoured YouTube and the forums, even here, and have not found an answer to my specific issue. In fact I have found conflicting information. I have a XSR receiver and a TBS Unify Pro…
-
I have a Naze32 w/ a fr-sky X8R running sbus connection w/ telemetry running on smart port soft serial 2 w/ a Taranis QX7 also I've: "set tlm_inversion = on" Post cleanflight 2.0 update. I have this …
-
I have received a few requests for adding RTH functionality on a "low battery" event to iNav firmware.
This issue is opened here and not in iNav as it this it would be better to implement a more gener…
-
Same problem as with betaflight (since you are based on them now):
Flashing works fine but the configurator does not connect.
I revertet back to Tested on archlinux and windows in chromium and c…
-
In Betaflight It can Auto detected and read fine. But in Inav its not auto detected.
Also, when I set manually `set baro_hardware = MS5611` the CPU load rise to about 660%
![screenshot from 2017-04-…