-
Hi Martin,
Some Questions:
1. I have just extended your code to allow import of standard .svg files to gcode.
- [x] Update power budget
- [x] Use two output resistors in series/parallel to improve power handlin…
-
Here are the issues mentioned by the outsourced company:
Thank you so much for your updated design, and we still have below issues:
1.#11_L1 p/n: VLS6045EX-151M does the orientation matter for…
-
- [x] Subsignals like IOA_n should be renamed to something like EEM0_n or IO0_n since we renamed the EEMs from EEMA/EEMB to EEM0/EEM1.
- [x] Use a currently unused CPLD pin for DDS select: pulled hig…
-
Hi,
The pcbs manufacturing + assembly company has 2 more questions. Please see attached
:
Notes:
* Open CV requires an FPU and an MMU - There is a port to MMU-less TI DSP's
but wouldn't bet on it unless you are interested in hacking on Ope…
-
To be changed for rev1.1
- Misc:
- [x] R57 must be 300R
- [x] Improve signal integrity for backplane LVDS lines (remove reference plane cut) (one cut between 2v5 and 12V0 seems unavoidable)
…
-
It would be nice if you can share not only images but eagle or gerber schematics of the board.
Ideally it should be.
- schema
- board
- gerber
- BOM
-
Current definition using the python dsl is annoying. Define a hdl inspired language and parse it into our current datastructure.
-
As I dive more into the code for OnStep, I come across areas that I have questions on ...
Including:
- What is T4C for? This is the Texas Instruments Tiva C board, but we don't have a build for…