-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
��huCg�N!adjN����D����YB� � �� ��������/t�H a���"Q"o�@&"�= ѵ��\"��㢧����ekR����huCg�N!ad l��#����huCg�N!ad l�#�G �3y�p"1z��Z a�� W�Q$zj ��W ��H�ErD��E�i����`�/$�����1��e;�k���…
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
Hello everyone, I'm trying to compile and execute the application in my own computer for debugging. The steps that I'm following are:
1.- Compile in Visual Studio 2019 -> All debug - Win32 ✔
2.- C…
-
As mentioned in the Arch Wiki (https://wiki.archlinux.org/index.php/HP_Spectre_x360_-_13-aw0xxx#Audio) and in many other places on the internet, the microphone array in the HP Spectre x360 13-aw0xxx d…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…
-
Before opening a new issue, please make sure that isn't already an open (or
closed/resolved) issue concerning the problem. If unsure if older issues are
about the exact same thing, just open a new i…
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…