-
Hello,
smalltv and smalltv pro are interesting little devices :-). Thank you for having already prepared the ISP header so that it is easy to install a different firmware.
We are currently tryin…
breti updated
11 months ago
-
Polish company Nettigo made an open source design to create a humidifier.
https://nettigo.eu/products/1709
They also added support for humidifier in their branch of code:
https://github.com/netti…
-
-
@ealex
Can I ask you some questions about the EG8010 on the EGS002 board? For the IFB signal, I'd like to use a Hall sensor instead of the sense resistor. The datasheet's I've found so far seem to i…
-
Hello,
My ArduCCAM module keeps MISO at the constant 2V level if it is not used. The camera module itself works fine. I can take pictures with the host application. However, I can't work with my SD…
-
**Completion is tracked in the linked PR.**
## Design Scope
Design an ultrasonic mesh nebulizer humidifier.
### Purpose
The purpose of the humidification system is to generate dry water va…
-
I was actually dreaming of this from September 2023 and it has came true.
I had changed the name and sounds of it!
I flashed it with the sounds you would get from windows 10 like usb connect or …
-
Hi! If you want the hotend cooling fan switch on when it's over 50°C (or what you chose in the firmware) you should wiring the fan to the HE1 pin (P2_04) and change the guide like below:
![Schermat…
-
The DC barrel plug was soldered backwards on the Buck converter causing failure on the Brix, px4, ppm and rc-receiver.
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…