-
### Version
1.2.9a
### Operating system type + version
Windows 10 64bit
### Behavior
* The program does not start. It stays showing empty controls and "does not respond" appears on the tittle…
-
After gerenrating a gcode file with Slic3r (Temperature of Extruder set to 228° and Bed to 90°) I checked the file and found M104 S228 command lines in the gcode file.
Transcoding works fine, uploadi…
-
### Version
1.41.0+win64
### Operating system type + version
Windows 10 64 bit
### Behavior
This has been something I noticed a couple of years ago when slicing a tricky shape. At the time I …
-
### Description of the bug
with versions 2.7.0 and 2.7.1; I tried to slice 2 parts and get the error "no layers detected".
using superslicer 2.4 or slic3r, no issue to slice.
the parts were designe…
-
Hey since Prusa Slicer 2.3 is now letting you paint supports and a seam now. Any thoughts on how to make something like this and use Prusa slicer instead? I know we had the cura bug but looking at th…
-
If you have Bridge Fan set for any value, the Fan will be turned on not only for bridges but on a first solid layer as well.
Slic3r interprets a solid layer over sparse infill as a bridge, which is n…
-
Slicer doesn't obey layer settings when printer Z full step/mm is used.
**Steps to reproduce the behavior:**
1. set printer's Z full step/mm to 25
2. set extruder's limits min to 0.16 and max 0.2…
-
### Version
2.2.54
### Operating system type + version
Win10
### Behavior
SS will frequently crash immediately on launch - the program appears, freezes for a few seconds, and then exists to d…
-
### Version
Slic3r-1.37.2-prusa3d-win64-full-201710211408
### Operating system type + version
Windows 7 64
### Behavior
The sequential printing section under Output Options in the Print setti…
-
see pull request
https://github.com/jluis/Boost-Geometry-Utils/commit/4c2c01609e211ce374cff1f0a1e716c8716fb6d2
jluis updated
11 years ago