-
**Problem Descripition**
rmmod legion-laptop.ko || true
insmod legion-laptop.ko
dmesg --ctime
[Wed Sep 13 22:57:13 2023] Linux version 6.2.0-32-generic (buildd@lcy02-amd64-076) (x86_64-linux-gnu…
-
## Building Issue
- Hardware description: ESP32
- RTOS: FreeRTOS
- Installation type: micro_ros as idf project component
- Version or commit hash: foxy
#### Steps to reproduce the issue
I cr…
-
#### Description
All i2c addresses are set following the manual firmware update for Pisugar 3 Plus in an attempt to get the RTC to function.
Prior to update only addresses 0x57 and 0x68 were set.
…
tetac updated
3 months ago
-
While testing a sd-card less network boot of Pi3 and Pi3B+ again, I noticed that `config.txt` seems to be ignored.
All files are loaded, but all entries in config.txt have not effect.
For example…
-
It would be interesting to have WPCM450 system emulation in QEMU. Some of the peripherals of NPCM7xx can probably be reused.
-
Hi,
In the v4.2 but also in the 4.3-dev, the https_request_example allows in the sdkconfig to enable both ethernet and wifi. (CONFIG_EXAMPLE_CONNECT_ETHERNET and CONFIG_EXAMPLE_CONNECT_WIFI)
Both …
-
### Reproduction steps
I have an ESP32-C6-DevKitM-1. I have flashed this with the Matter light example from the esp-matter SDK. I am using Ubuntu 22.04 as a Virtual machine on Windows for doing the…
-
### Creating a feature request
#### Is your feature request related to a problem? Please describe:
No
#### Describe the solution you'd like:
The Ability to change default user name (dietpi) on…
-
### Describe the bug
This morning I used the rpi-eeprom-update tool to update the RPi's EEPROM to 2022-07-22. While the upgrade worked, booting to the OS on the SD Card no longer did. All I had was t…
KcrPL updated
2 months ago
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…