-
Hřídel motoru co podává filament se začala protáčet. A ten motor je úplně horkej
Ani na něm nejde udržet prst.
![47473872_1965259950256928_5619239450048462848_n](https://user-images.githubusercont…
-
I've added libusb support, and we can now enumerate, select, and perform control transfers on USB devices. We have no idea of the mapping between /dev nodes and the libusb handles, though.
There's …
-
Pins are set correctly, but like they are not enabled.
It's mega with RAMPS1.4
Motors are controllable over marlin, but not trough moveo_ros
I tried supplying power to Enable pin to the driver …
ghost updated
5 years ago
-
Wayland session forbids using GUI applications as sudo:
https://wiki.archlinux.org/index.php/Running_GUI_applications_as_root
I know there is a workaround with xhost (https://www.reddit.com/r/Fedo…
-
Creating of the software that will power the line following system.
-
Purpose of this issue is to discuss hardware problems of FloatShield and possible changes or enhancements. The hardware should try to adhere to AutomationShield guidelines https://github.com/gergelyta…
-
### Description
Random layer shifts on different heights on both x and y axis, sometimes on both, sometimes just on one axis, reducing speed, acc and jerk, raising vref does not show any improvemen…
-
Hi,i have new stepper driver dvr8825 but if i engrave 40x40mm size final product is cca 20x20mm
If use stepper driver A4988 engraved size is ok.Please how to set DVR8825?
Thank you.
-
I am trying to connect a Pololu board to my android. This library has been working great for an arduino... but I cant figure out how to make this board register... I can see in the log that it is tryi…
-
Do you have any plans to make a step stick format of the board?
of course only a single chip can fit on the board
just a thought, been using google to see if it has been done and your board is w…