-
Targets which use openamp need to be configured with an optimization level setting other that -O0 to be compiled correctly.
I tested this with these targets
- verdin-mx8mp:rpmsg
- nrf5340-dk:r…
-
Recently I've started to learn the internals of NuttX. I'm currently using [nucleo f429zi](https://www.st.com/en/evaluation-tools/nucleo-f429zi.html) board.
While looking at lower half stm32 serial…
-
Recently bought an `esp32-s3-devkitc-1`, and I have installed the idf toolchain to verify that idf hello_world project can work.
But when I use the idf toolchain to build nuttx, the board can't boot …
-
## Feature request
#### Feature description
`MultiThreadedExecutor` should honor CPU affinity to be set by user application for process space, including inherited affinity.
https://github.com/r…
-
When tested with RTI Connext it seems that discovery is not finishing properly (using the Desktop impl):
```
!!sdisca
Domain 0 (pid=174): {1}
GUID prefix: 8f937eb8:00ae729f:03e90000
RTPS Prot…
-
While building the final build , we are encountering the build errors in src/modules/sensors/parameters.cpp and src/modules/sensors/rc_update.cpp
in these , the major errors occurred due to nullify…
-
Currently CI checks takes long and very unbalanced time, the top-3 slow ones are:
- `3h23m` for risc-v,
- `2h46m` for xtensa and
- `1h56m` for arm-05
```
NAME ELAPSED UR…
yf13 updated
3 months ago
-
Right now there are a bunch of warning generated that need to be cleaned up. Most are duplicate c declaration warnings and duplicate label warnings. I think we can use C domains to handle the duplic…
-
Hello,
I am relatively new contributor, and I am looking to add support for the SHT4X temperature and humidity sensor. I have a branch that is a work in progress here: https://github.com/linguini1/…
-
can we use this code for bigger bldc motors with esc?
Basically, this system works on small drones according to the study