-
```
Our "about Fritzing" text, which appears in almost all sources of info
about Fritzing needs an update to include non-arduino prototypes. There's
also a bit of redundancy mentioning "designers an…
-
```
The number of hardware mods required for some of the more advanced extras --
like mass storage and mp3/apcm audio for telemetry etc -- are becoming too
tricky to handle on the original PCB.
One…
-
```
The number of hardware mods required for some of the more advanced extras --
like mass storage and mp3/apcm audio for telemetry etc -- are becoming too
tricky to handle on the original PCB.
One…
-
```
and how is it exported in that case.
```
Original issue reported on code.google.com by `irasc...@gmail.com` on 23 May 2011 at 1:35
-
```
and how is it exported in that case.
```
Original issue reported on code.google.com by `irasc...@gmail.com` on 23 May 2011 at 1:35
-
I use this code:
void setup() {
pinMode(4, OUTPUT);
}
void loop() {
digitalWrite(4,0);
delay(1000);
digitalWrite(4,1);
delay(1000);
}
The esp8266-12 should change the state of pin GPIO4 …
-
It's now responding (responding is not the right word) to a small subset of keys, and will repeat them about 30x.
The USB serial port debug interface will drop about 3 seconds after typing the first…
-
```
Either it should be treated similar to the export in the PCB view (i.e.,
placed to the right of rotate/flip and with a separator), or it should
removed from these views.
I'd vote for remove, but…
-
```
Either it should be treated similar to the export in the PCB view (i.e.,
placed to the right of rotate/flip and with a separator), or it should
removed from these views.
I'd vote for remove, but…
-
```
The number of hardware mods required for some of the more advanced extras --
like mass storage and mp3/apcm audio for telemetry etc -- are becoming too
tricky to handle on the original PCB.
One…