-
Hi
I installed a BL Touch (from Antclabs) and the Micro Swiss Direct Drive Extruder Setup. Now i need to change the #define X_MIN_POS and #define Y_MIN_POS to #define X_MIN_POS -5 and #define Y_MIN_P…
-
I upgraded my V-King with a SKR v1.4 Turbo and TMC2209 drivers. I am using Octoprint. It has been running very well. However, when I went to run a G28 the other day, it immediately failed: " Your prin…
-
Would it be possible for you to provide the bootloader for a SKR Mini E3 V3 board? I have one that is bricked and would like to see if flashing the bootloader resolves the issue.
-
About mid July they updated the Stealthburner STL's, and one of the changes was to the motor_plate. The change is a modification to the large locating pin near the top of the body that fits with the …
-
My mini CNC mill has been working great with Remora firmware running on a Bigtreetech SKR V1.4 with TMC2209 drivers. The host is a Raspberry pi 4 Model B. Optional serial debug interface is also conne…
-
Hello, I am retrofitting an SKR e3 turbo on a Chiron 3d printer. I am randomly getting
On klipper:
“TMC ‘stepper_z’ reports error: GSTAT: 00000001 reset=1(Reset)
it freezes and asks for firmware_r…
-
Hi all,
I am trying to set up a small machine using the TMC 2209 driver and want to use the sensorless homing feature. So my idea is to have the stepper run until it reaches the end and have it stop …
-
Hi,
I've run into a bit of a problem where my SKR 2 board is set for VCC power and is throwing low errors for me Y, Z, Z2(which isn't connected). X and E report back okay. I will post the full M122…
-
Is FYSETC TFT/LCD supported ? They have a custom marlin fork with LCD support on it, i did a simple search on vanilla marlin and found nothing.
Any plans to add ? Or any change to merge a PR, if an…
-
How to Turn on Fan automatically when temperature goes to 50. Which pins i should define. I have SKR 1.4 Turbo. I also saw the pin file.