-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Compilation with multiple serial ports while having `DWIN_CREALITY_LCD` enabled results…
-
I'm using a Sidewinder X1 and Repetier Server!
Before installing the S42B there was no problem to change the filament during a print.
When I hit PAUSE the nozzle would raise 5mm and X/Y would home! …
-
Step issues:
BLtouch connector has no pins.
![image](https://user-images.githubusercontent.com/47440988/119248355-383c7580-bb56-11eb-9600-926fa3c605cc.png)
5V-V_bus header; only one pin showing, …
-
I installed a S42B on the X-axis of one of my printers which has a SKR 1.4 turbo board and Marlin-2.0.5_7_7_20 installed and was working fine on a 2209 driver. Calibrated the S42B OK, commented out th…
-
Hi all! Printer cannot print. After homing, nothing happens. Clipper gives you an error: "Endstop z still triggered after retract"
When the printer is turned on, the sensor pin clicks several times. …
-
Hey guys, I’m wondering if anybody can help me.
I’ve had this issue before but it had been fine for quite a while, but recently it has become a steady problem.
So the problem I’m having is that …
-
When you manually pause a print (or the gcode has a M400 U1 pause) Panda Touch does not let you LOAD or UNLOAD the filament. You have to use the original printer interface to get it working.
Strang…
-
So ive upgraded to the BTT E3 v1.1 board.
Installee latest reprap firmware, set up the wdc interface and got everything up and running.
everything works just fine except for homing, my x and y axi…
-
Hello,
I am working with a TFT35 V3 E3 that is connected to an SKR2 Rev B; all on a Creality Ender 3 Max. I have had this collection working in the past, but have recently redone the firmware to a…
-
Hello,
after a long try and error i have got my Ender 3v2 to work with the skr mini e3 v3 but the printer behaves strange. I wanted to print the calibration cube. When i start the print, the printer …