-
Input:
```
routes:
config:
- destination: 0.0.0.0/0
metric: 100
next-hop-address: 192.168.122.1
next-hop-interface: bond99
table-id: 254
- destination: 192.1…
-
What might come next? Some ideas.
Poll: Will be available on TypeForm
Template:
* [ ] certs (connecting and checking expiry date): also check CRLs; have a look at https://github.com/matteocorti…
-
Hi Alex, I am doing some line rate testing on the U50 and seeing something strange.
I have built a IF_COUNT=4 design and feeding all four interfaces from a switch at a rate close to 9.5Gbps.
I…
-
Our Kubernetes isn't available since the autoupdate on 07.12.2020 from stable channel. I am not quite sure where exactly the problem is, but it looks like the internal network communication between th…
-
pr1040でサーボが入らなくなる(入ってもガクガクする)問題が発生し，原因を調べた所，https://github.com/jsk-ros-pkg/jsk_robot/issues/794 と同じようにrx errorが多くなっていました．
## 原因特定の経緯
pr1040が暫くaudible warningでrealtime loopについて喋っていたのでサーボを入れてみたが入ら…
-
My new RPI 4 has a lot of packet loss:
```
$ ping 192.168.10.10
PING 192.168.10.10 (192.168.10.10) 56(84) bytes of data.
64 bytes from 192.168.10.10: icmp_seq=2 ttl=64 time=0.431 ms
64 bytes from…
-
### Description of the problem
I have an old Synology DiskStation and it seems that it doesn't actually work at 2.5Gbe with a Sabrent NT-S25G USB adapter, even though both it and the switch indica…
-
When I attempted attendedsysupgrade on my Raspberry Pi 3 Model B, the server built me an image for the rpi-2 profile. Is that safe to flash, or is the server building something that won't work? It s…
-
Buster, the default Debian used by adeb, is now `oldstable`.
New `stable` is Bullsye: https://wiki.debian.org/DebianReleases
There are a few changes to support Bullseye in adeb, mostly around pa…
-
Snapshot 21301-21326
Can't set up PPPoE in VLAN 6.
```
Sun Nov 20 04:29:43 2022 daemon.notice netifd: Interface 'internet' is now down
Sun Nov 20 04:29:44 2022 daemon.notice netifd: Interface …