-
I am using Aprsdroid to send the frames over Bluetooth using Lora32 v2.1 TNC. It works intermittently, as some of the frames are not appearing on the radio.
I've leveraged the built-in debug capabili…
sq2mo updated
1 month ago
-
Adafruit ST7789 Wide Angle 240x240
ESP32 DeviKit v4
I'm try to learn how to use the module Display but If I digit this code:
import display
tft = display.TFT()
tft.init(tft.ST7789, miso=19, mos…
LDS79 updated
3 years ago
-
I Have used TinyGSM for my SIM7000 modem for some time now, and a strange issue with the 0.10.1 Version of the lib occured.
If i configure as SIM7000 in my code I cant connect to the network, BUT if …
-
Hello,
I was wondering if it is possible to connect WS2812 5050 LED Strip with FastLED?
The strip require 5V if I understood.
I have both old and new version. According to the scema it is writte…
-
Implement peek() like this
int peek() override {
return (uint8_t)rx.peek();//add to TinyGsmFifo.h
}
TinyGsmFifo.h
uint8_t peek(){
return _b[_r];
}
-
### The problem
I have four of the Lilygo/TTGO T-camera ESP32 boards with OLED and mic purchased from [AliExpress](https://www.aliexpress.us/item/2251832782369013.html), albeit not using the I2S mi…
-
1. Stratux version:eu27
2. Stratux config: 978 and 1090 RTL-SDR
YES GPS
NO 978 Mhz (UAT)
YES 1090 Mhz (ADS-B/Mode-S ES)
YES 868 Mhz (OGN)
NO 162 MHz (AIS)
YES AHRS Sensor
YES Baro Sensor
…
-
Hello,
I've been told that there is a built in battery voltage sensor on pin36. Is that correct? No matter what I try I can't read it.
Thanks!
-
There is an excellent LoRa map link that shows both trackers and igates and nothing else. However, it doesnt show my tracker. This is because the filter requires a TOCALL of APL* and it seems my tra…
-
Could you please also include a PDF file that gives the measurements and spacing for the solder pads? My software doesn't seem to recognize any of the existing file formats so I will need to create m…