-
TL;DR: I want to hear from you if you have ever needed postcard to do something ("something" is defined below) that it doesn't today.
## Background
Postcard is generally very efficient on the wi…
-
It seems that only my JSHint task displays detailed error info in the notification message. If I have errors in SASS or CoffeeScript files, the notification only says "Error".
Furthermore, `grunt-not…
-
#### Summary
Run The Things Stack using Docker Compose.
Connect a gateway that uses the UDP packet forwarder.
Update and restart the stack using `docker-compose pull` and then `docker-compose up …
-
Hello I use Atmega4808 mcu (megacorex - bare chip) with arduino lmic library OTAA. I can join and perform uplink once successfully but after that I cannot perform any more uplink.When I remove DIO0 pi…
-
### Summary
Above error appear while installing esp32 drivers
### Current Situation
not able to do further process
### Desired Situation
na
### Code of Conduct
- [X] I agree to follow TTN's [Co…
-
Hi @czhu95 ,
Thanks for providing the codes!
Recently I use your codes to ternarize a ResNet18 using CIFAR10. Firstly I use tensorpack to train a ResNet18 to validation error as 0.083. However, …
-
### Feedback
I do not understand, how I can set up my own device tracker. The documentation describes some abstract examples, but related to a fixed platform. It is not clear, how I could start using…
-
A LoRa module is connected to ESP8266 via SPI (not the flash SPI but: MOSI GPIO13, MISO GPIO12, SCK GPIO14) to an `ESP8266.
Scenario 1: When the ESP8266 is started up without the LoRa module on the S…
-
Some people recently built a city wide internet of things network in amsterdam using low powered wifi things http://thethingsnetwork.org/
In total they used 10 nodes each costing around $1200 to conn…
-
2024-06-15 23:19:33.604 WARNING (MainThread) [homeassistant.helpers.entity] Entity sensor.eui_xxx_ext () is using self.async_update_ha_state(), without enabling force_refresh. Instead it should use se…