-
你好,我编译出ota刷机包了,以前没搞过android,所以对这个ota包有点疑问:
openwrta-18.06-snapshot-r8273-51a913a74d-realtek-rtd129x-zidoo-z9s-squashfs.ota.zip
这个ota刷机包是不是只包含了openWRT和Android的文件系统,不含kernel的映像?
android的ota不是只有完整…
-
### The problem
I have at least two models with ESP32 + I2C sensors. WIth the last dev (2021-10-0), I2C sensors either are not scanned or return 0 for my BH1750). For a ESP01m with ADS1115, voltage…
-
_For new Package Requests, see the guidelines_
### Setup
_Package Name:_ Hass.io
_Package Version:_ 20200910-2
_NAS Model:_ 918+
_NAS Architecture:_ x86
_DSM version:_ DSM 6.2.3-25426 Upda…
-
## The problem
Raspbee will not completely recognized. Change configto an unexisting port shows a different error.
especially this section confuses me.
```
Path | Vendor | Product…
-
Well, when I used HTTP only (with an invalid SSL cert) the updater showed an "problem" and could not perform the update query. Changing the url inside the props to HTTPS and providing an valid SSL cer…
-
### Describe the issue you are experiencing
Hi!
Long story short: All the addons from the official store disappeared without any clear explanation.
I've installed 5.11 a couple of weeks ago and ev…
-
Hi,
I'm provisioning new firmware updates via https server, downloading the gz to SPIFFS and (**hopefully**) using your library to update. It's failing, so went to your example and that fails. He…
-
I have tried to update to 5.5 from 5.4 on RPI4 via CLI by running:
```
ha os update --version 5.5
```
This has worked for previous releases (updating to 5.4 etc) however when I run the update toda…
-
Hi!
Using: Raspberry PI 3 B+, Homeassistant, External SD-card and ethernet cable.
Config:
Rapsbee - config.txt on SD-card.
enable_uart=1
dtoverlay=pi3-miniuart-bt
HA
device: /dev/ttyAMA0
…
-
I have been attempting to install wyze_hacks_0_5_04 on some v3 cameras I received. I installed the 4.36.0.228 firmware found within the tools/v3/firmwares folder. I was unable to find init_v3.sh as di…