-
I'm using the slic3r-linux-x86_64-1-2-9-stable release.
I have these settings:
layer_height = 0.05
fill_density = 5%
bottom_solid_layers = 7
top_solid_layers = 24
UPDATE: I've tried setting bottom_s…
-
```
What steps will reproduce the problem?
1. download and run RepG 0037 Mac installer
2. load part and click Generate GCode
3. drop down box containing slicing profiles ONLY contains one profile for …
-
### Version
1.41.1+win64
_Use `About->About Slic3r` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEA…
-
Bridge priority looks like it's lower than perimeters and possibly bottom layer solid fill.
Bridge priority should be higher than everything, possibly excluding the outermost perimeter.
![Bridge and…
-
Slic3r 1.1.6 stable produces errors in spiral vase mode for layers above 265mm. It generates single protruding rings with a diameter difference of about 1mm. This happens again about every 50mm.
The w…
-
I don't know how to zoom in on the 3D toolpath preview. Possibly the mouse scroll wheel does it but since my trackball doesn't have a scroll wheel I don't know. I tried to find the relevant key but wh…
-
While filing #4308 I realized it would be useful if slic3r supported a placeholder such as [bed_temperature_[current_extruder]] when using multiple extruder printers. This way it would be possible to…
-
**Bug description**
When slicing a model the application crashes. Tried multiple different profiles but to no avail.
**Expected behavior**
For the model to properly slice and present me with usea…
-
### Version
2.1.1+win64-201912101512
### Operating system type + version
Microsoft Windows 10 Home 10.0.18363
### 3D printer brand / version + firmware version (if known)
Duet2 Wifi 2.05 (20…
-
Related to 1.2.9, which I am still super excited about, a minor bug.
In the individual part settings, it's possible to select a "Infill extruder" and also a "Solid infill extruder" different from the…