-
I am having issues trying to get this filmware to function on my esp32-s3 for some time. Has anyone made this filmware work with esp32-s3? I'm pretty new to this type of stuff, So I may be missing inf…
-
I followed the example code closely and set up an ESP32 with PSRAM and an external I2S DAC. Project is built in PlatformIO and I've made sure the CPU is set to 240MHz.
Sound output is very stuttery…
-
The ESPHome media_player does not output audio when triggered by the assigned yTubeMusic media player. However, all other media_players work fine with the yTubeMusic player. While the song and image d…
-
### The problem
Trying to get url out of media_player but even getting current volume level is not working here is my code:
```
i2s_audio:
i2s_lrclk_pin: GPIO27
i2s_bclk_pin: GPIO25
media…
-
### Target name(s)
ESP32_REV0, ESP_PSRAM_REV3
### Firmware version
1.9.1.181
### Was working before? On which version?
_No response_
### Device capabilities
System Information
HAL build info…
-
Hi,
I am currently testing in ESPHome 2024.2.0 . with an ESP32-s3-N16R8. When I stream some mp3 files, tts using piper or nabu casa and radio using 'radio browser' the playback speed varies from ve…
-
Feel free to post useful resources, suggestions or show off your projects here. Older comments of this nature can be found in #21 .
-
Schreibfaul ,
Thank you for your efforts and responses so far:
It's a lengthy battle, and I'm still losing.
Having started with a standard no PSRAM, A VS1053, and an ILI9341 with MMC resistor…
-
Do you plan to publish the source code? And is it in the Arduino IDE or the IDF?
-
刚开始,买了espressif s2-solar 开发板,进行学习,但发现教程少,貌似不算太主流。使用PlatformIO+Clion 搭建开发平台,也搭建的不是特别好,而且这个开发板即使在 espressif 里面,也不是主流,这就很尴尬了。捣鼓了约有一周的时间,开发环境还是有问题,无法搞定只带最少依赖的环境出来。放弃掉先。
后面又买了 stm32 平台的板子, 这次买板子,就着重考虑了3…