-
Hello, is it possible to use two or more string of LEDs at once by dividing into segments or connecting to different pins.
Best regards
-
[It can be downloaded here.](http://www.st.com/content/st_com/en/products/embedded-software/proximity-sensors-software/stsw-img007.html)
It would need to be ported.
-
Hi, would it be possible to build this in the Arduino IDE using the ESP32 dev module board?
ash73 updated
6 years ago
-
After flashing the current firmware 3.1.7. on my micro quad (CJMCU) important settings (in this case: I wanted to set the receiver to RX PWM) are not saved. Additionally all 4 motors beginn spinning a…
-
Hello DrGFreeman.
Do you know if will work accurately with 3V modules?
Thanks.
-
Dear, I would like to know if the GP2YA41SK0F type really is valid or not. Because I didn't find this type (eg at https://www.pololu.com/). I think the correct is the GP2Y0A41SK0F.
-
The MinIMU-9 v3 has been discontinued, and the new (pin-compatible) version uses different chips:
https://www.pololu.com/product/2738
-
imu works on arduino using the library:
https://github.com/pololu/LSM6-arduino
https://github.com/pololu/LIS3MDL-arduino
then using rosserial:
http://wiki.ros.org/rosserial_arduino/Tutorials
…
-
Please add our DualMAX14870MotorShield library to the library manager:
https://github.com/pololu/dual-max14870-motor-shield
Thanks.
-
Need to wire in the VNH5019 motor driver to the new ruckus chassis.
I used this driver because it was what I had on hand.
https://www.pololu.com/product/1451