-
Hi, when I power up the mainboard with the microSD extension cable connected it is stuck on blue screen. Even when the microSD card is not inserted, only the extension. Need to disconnect the extensio…
-
Hello
We use printrbot 3D printer with Cura 15.04.6 software.
When i run the bad leveling wizard option that working fine.
After that the test printing is working fine and printing on the platfor…
-
### Version
2.2.53 stable
### Operating system type + version
win10
### 3D printer brand / version + firmware version (if known)
custom corexy reprapfirmware dual extruder printhead
### Be…
-
J'avance sur la suite.
Voici un article intéressant sur les pro/con du corexy vs prusa style.
https://all3dp.com/2/corexy-3d-printer-is-it-worth-buying/
de la doc théorique sur reprap:
https:/…
-
Hi,
I am building 3d printer with dual x carriage. And each x extruder have 2 nozzles. Totally, there are two x axises and four nozzles. I could not do this in Marlin firmware ? Marlin firmware is …
-
Hi i love this project, and I fully share the ideals of fourthievesvinegar, I wanted to ask if you can insert an arduino o sketch or a wiring diagram, I printed all the pieces with my 3d printer and …
-
Hello,
I bought a nema23 stepper motor from www.steppermotor.fr, driving it using an L298n module with a supply voltage of 12 V DC and 2 A, but the operating torque is very low and it doesn't lock.
…
-
The 3d marmot included in the tikzlings package,
```
\documentclass{article}
\usepackage{tikzlings}
\begin{document}
\tikz{\marmot[3D]}
\end{document}
```
caused an error at TUGboat's commerci…
-
https://github.com/Doodle3D/WiFi-Box/wiki
-
I have played with some other "laser" options for inkscape.
but this plugin is just so simple to use with my 3d printer
would it be possible to add Gcode for laser option?
i suggest adding a ta…