-
I'm not sure where exactly to report this, as it can more than likely be a hardware issue. But making a note here for reference.
While cleaning up TTN Mapper data I stumbled on a pattern where Cube…
-
Integration of the traditional iGate Feature from Peterus.
So that we only need one Firmware for the Boards.
Config for the iGates from the Web-Interface.
-
### The problem
With
- A AI-Thinker ESP32-CAM
- Using a esp32_camera: component
- Added to Home Assistant
The Camera will always show idle state and only deliver the idle framerate, no matter…
-
I was recently interested to build static and shared library versions of the `micropython/examples/embedding` case using cmake and I managed to get it roughly done ( see this [public repo](https://git…
-
One of the best functions is being able to access and use the CO2 gadget via the web and with MQTT. It would be great to be able to set a fixed IP address for the CO2 gadget.
At the moment, the IP …
-
Hi Invandy,
John again.
Sorry to bother you but Ive moved over to a D1 Mini esp32 module, code was running great on my ESP Node MCU dev 12 module. I now have some of the ESP32 modules and would like…
-
Hello,
After build, upload and upload filesystem image, I've got this on my terminal:
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_…
-
Would it be possible to implement the TFT ST7735S which has the same pinout?
Thank you so much.
-
**Hardware:**
Board: Heltec ESP32 WiFi Lora Board Core
Installation/update date: 25/nov/2017
IDE name: Arduino IDE
Flash Frequency: 80Mhz
Upload Speed: 921600
**Description:**
I want to …
rmh78 updated
5 months ago
-
**硬件设计方面**
1、MCU换成esp32 c 系列 ESP32-C3FH4 (极客版)https://github.com/cgrrty/T12-PD-SolderingPen/issues/4#issue-1025986130
下一个版本可以考虑 树莓派pico的芯片方案 (创客版)
2、屏幕换成ST7735 0.96寸 与原0.96寸 SH1107 尺寸大致相同;
…