-
So I bought an AT89C2501-based diy clock for my kid to solder, and ... it isn't working. What a great excuse for looking into the hows of a new MCU! It looks like I'm probably going to build your prog…
-
Congratulations for the excellent work.
I would like to suggest, if possible, to also focus on the hardware part, so as to allow everyone to create their own handheld 3d scanner, thus sharing the inf…
-
現状,制御系・電源系でCANのネットワークが分離されている.
https://github.com/open-rdc/aiformula/issues/72#issuecomment-2106169415
電力系側のデータを制御系側のCANに流すことで,例えばMPPの情報などをJetson等で取得できるようにする
-
Do you think it would be possible to run this using 12v power from a car?
-
* [x] Power supply ICSP
* [x] Power supply USB
* [x] Power supply 12V
* [x] Led Vin
* [x] Led 3.3v
* [x] Upload firmware
* [x] Led Blink
* [x] USB detection
* [x] RX Led
* [x] TX Led
* [ ] L…
-
- HDD (spinning)
- 16 € per TB at 14,18,20 TB ([Toshiba Enterprise Capacity MG07ACA](https://geizhals.de/toshiba-enterprise-mg07aca-14tb-mg07aca14te-a1812522.html?hloc=at&hloc=de))
- 8 W power c…
-
@christiankuttke seems like we need to add an additional fuse between the input and the 12V terminals, correct?
For the CE certification we need a bunch of additional information for the technical …
-
Hi, is a 12v bistable two-coil relay available in this application?
-
When I use the 5v adapter it doesn't power the 330's for more than a brief moment on plug in.
When I use the 12v the motor it powers the 330's but starts to burn up as @jzxchiang1 experienced in #…
-
I tried it today with the
rbt100 lfp12 bt
Every parameter except Charge State was shown. So it works perfectly
Thanks :)