-
## Description
CHIP has some KMS resources currently in `vaec-cms`; why? Set 'em up in `vaec-cie` if needed.
## Tasks
- [ ] [DevOps] Determine what KMS resources we are using and why.
- [ ] [DevOps] …
-
Hi Team,
we installed rocket tools and chisel in machine and set the path, when we run the cmd "make verilog" in rocket-chip we are geeting attached error. Can you help me on this issue please
…
-
At the start i must say i'm total new with arduino ide, so i might be doing something wrong, however i'm trying to use 3d printer board for other purpose, but by all means i can't get it working.
The…
-
### What I did:
On my MBP, M1 Max
```bash
docker pull savatar101/omniparse:0.1
docker run -p 8000:8000 savatar101/omniparse:0.1
```
Then I got the below output:
```bash
==========
== …
-
### Reproduction steps
I tried the tags with v1.0.0 ,v1.1.0.0 and v1.2.0.0 and compiled the virtual device as node: 0x654324
When run the chip-tool:
```
1. ./chip-tool onoff on 0x654324 1
2. ./…
-
### Geode Issue
- [X] I confirm that this crash is NOT related to a mod but directly to Geode Loader itself.
### Platform
MacOS
### Geode Version
v3.1.1 (latest)
### Mods Installed
…
-
### Describe the issue you are experiencing
Starting from version 6.0 or another one released from May my Eve Energy and door sensor devices are permanently offline. They work perfectly well in HomeK…
-
Currently you have to pass the enable pin of the chip to the driver. However, the datasheet does not mandate a custom power-up sequence where you toggle the enable pin of the chip with a certain timi…
-
If the Miyoo Mini + doesn't sync the time first, then the files get a lot of wrong dates and times. Is there a way to ensure syncthing starts only after the wifi or time sync service?
Also If you d…
-
From the test description:
https://github.com/lowRISC/opentitan/blob/9cfe4e4a272953420648899ce49ed186024507a8/hw/top_earlgrey/data/chip_testplan.hjson#L436-L438
The described enhancements should…