-
As i am working on a local positioning system based on DWM1000 from DecaWave, the time between interrupts and processing data need to be as small as possible < 1msec.
So the ESP32 is triggered by an …
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
My environment
* Arduino IDE version or Toolchain: 1.83 mac
* dw1000 Library version: latest as per today's date
* Arduino device: arduino pro mini 3.3V 8Mhz
* Used adapter board: no, bread …
-
Hi,
I want decawave 1000 device driver source code.
The DW1000 driver source code is targeted for the ARM cortex M3 but is readily portable to other microprocessor systems.
where should i get it.
…
-
This issue tracks the porting of boards and SoCs to https://github.com/zephyrproject-rtos/zephyr/issues/51833.
### SoC series: AGILEX
- [x] soc: AGILEX
- [x] board: intel_socfpga_agilex_socdk, …
-
Hi all,
we are here to reporting a strange (for us) behaviour of zephyr timers:
We are working with decawave 1001 (Ultrawide band module from Qorvo) on Nordic micro, using:
Zephyr 3.1.0.
NFR c…
-
Building the sample demo `samples/sensor/lis2dh` with the decawave_dwm1001_dev result in
~~~
uart:~$ *** Booting Zephyr OS build zephyr-v3.2.0 ***
Device lis2dh12@19 is not ready
~~~
It se…
-
Hi all,
we are struggling with strange (for us) behaviour of zephyr.
We are working with decawave 1001 (Ultrawide band module from Qorvo) on Nordic micro, using:
- Zephyr 3.1.0.
- NFR connect S…
-
**Describe the bug**
Project fails to build using `Sysbuild` with an out of tree board.
This issue was first posted #53780 and fixed with #56801. The issue appeared again at aff9683387ff3fc6a88cb1…
-
I used DW1000.getTempAndVbat(temp,volt) to read value temperature and voltage but value not true
temp : -132.039993, volt: 2.513873
->> i think value voltage may be true, but value temperatu…