-
The SD file transfer does not work neither USB nor Wifi.
After starting the transfer, _"No firmware response detected for sd card action. Assuming success and continue"_ message appears and the tempe…
-
ability to attach picture or document to notification
email
telegram
line
pushover
one usage would be to enclose a camera capture per user feedback TBC
it is definitly not a priority task so…
-
Hi,
I would like to have confirmation on the rt and tx usart3 pins.
RX = PD8 and TX = PD9.
![image](https://user-images.githubusercontent.com/100755230/183240321-a5b13b75-74f3-48b9-83bd-b3d783f6f…
-
Integrate the [ ESP700] command into the button so you can start file printing directly from the button in GCODE HOST mode
-
When attempting to run a gcode file from the default 'gcode' directory, the file run (clicking the play button) fails with ERROR:61 SD card failed to open file for reading from default 'gcode' folder.…
-
Got several request for variable support but cannot find the issue - so recreate it
got a clear user case for cnc purpose which expose the needs and some way to use it
[macro_-_home_XY_to_center_of…
-
### Controller Board
10V
### Machine Description
N/a
### Input Circuits
```yaml
N/A
```
### Configuration file
```yaml
name: "WM16 Mill"
board: "ESP32 Dev Controller V4"
control:
safe…
-
A prototype of the MRR ESPE board, which uses 2 x 74HC595 shift registers to implement I2S stepper stream for the ESP32, is out. Most of the board design is based on the MRR ESPA board (many many less…
-
Hello,
Firstly, awesome project. My friend and I are very impressed with the ease of use and are hoping to use it in the near future.
I was going to make a few customizations for our use case, b…
-
The configurator is now in beta state 🎆
The current version is compatible with ESP3D 3.0 only
It still need to get improved text content (suggestions/contributions are more than welcome) and add …