-
I've rigged up my attiny1604 to a CH340C USB to serial converter. And additionally connected PA3 to the CH340C RTS pin. Then added an interrupt that resets the attiny on level change. This allows me t…
-
Hello,
I would like to suggest that the uC Attiny85 bootloader be automatically burned before the sketch, when the upload is performed using the programmer.
This uC can operate with 1MHz, 4MHz, …
-
Let me start by saying thanks for this great project!
I designed a little pcb with an Attiny1614, following your wiring guidelines. I used an Arduino Nano, programmed it in Arduino IDE 1.8.13 with …
-
### Description
I've got an ARSession, the configuration for which is an `ARFaceTrackingConfiguration` and has `.providesAudioData` set to `true`. When it was set to `false`, Twilio Voice worked fi…
-
Hey,
I've been looking through the code to see if it is possible to run this code on an ATtiny (1614 for instance) and was curious if you had any input. I would love to run this code on an ATtiny w…
-
I have been trying to get my head around how to actually use the reset/upi pin as a hardware reset.
I have used your software trick to great effect but I was wondering how to just enable the pin dire…
-
The menu is already getting kinda long, the entries are almost identical, and the DD series is still on the way.... I'm pretty sure it can be shrunk waaaay down.... (and no, I didn't add all those ent…
-
Most of the ATmega4809 board available so far have an on-board EDBG chip of some kind, and don't need a bootloader. (Uno WiFi 2, Atmel Xplained Pro, Atmel Curiosity)
However, it might be nice to hav…
-
I found AttinyCore through Optiboot's site. https://github.com/SodaqMoja/optiboot/blob/master/README.rs485
I'm trying to upload via rs485. I have already burned the bootloader with optiboot.
I am …