-
There is a configuration for 30 Ohm impedance on layer Int1 and Int5 instead of 50 Ohm.
-
Hi @xzhu1991,
Pete and I are trying to convert some feeders from Synergi to OpenDSS and it seems like the impedance matrices in the output are off.
Looking at the reader code, it looks like thi…
-
According to USB specifications the data lines should be routed as 90ohm impendance differential and 45ohm single ended.
On the indoor layout the lines are very poorly matched to 140 / 126ohm.
Sta…
-
I am looking at the code, and I think there's an issue in how you handle reference frames
https://github.com/lucabeber/effort_controller/blob/25213244d5cf555498ff02a56f78fcd18e1fd8e6/cartesian_imp…
-
### What happened?
Hello!
I'm working into exporting an intan file to a nwb format - I am customizing the labels, and therefore not using Intan's written code.
I followed the instructions in …
-
Bluetooth-volumeprobleem X20S
Het bluetooth-volume is minimaal en regelt mee met het hoofdvolume en vario.
Het geluid op de telefoonaansluiting en via de zenderspeaker is prima. Ook via de handlei…
-
/home/lwd/ur5_ws/src/Compliant-Control-and-Application-noetic/control_algorithms/impedance/include/impedance/Impedance.h:27:10: fatal error: joint_state_msg/Jointstate.h: 没有那个文件或目录
#include "joint_s…
-
- Impedance profile added
- Additional directives for 50ohm lines added
- Trace width unified for impedance control
- P_version project parameter added, rev on schematic table filled with version n…
-
If you calculate the DAC output impedance for the different input values, you will find that the value is close to R/3 except for `S[2:0]==3'b111`. If you add another resistor of value R before the th…
-
Can the SMA cable cause loss of signal due to unmatched ampedance? The feelings from Tak seems to say that yes.