-
- [x] basic information on the JTAG port
- [ ] OpenOCD debugging
- [ ] OpenOCD flash access
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
**Impact**: simulator
**Tell us about your environment:**
*Chipyard Version:* 1.4.0, Hash 58076c
*OS:* Linux ubuntu 5.8.0-40-generic #45~20.04.1-Ubuntu SMP Fri Jan 15 11:35:04 UTC 2021 x86_64 x…
-
# Problem Description
I want to use the built-in USB serial functionality comes with the ESP32-S3 SoC in addition to the UART interface (not simultaneously). However, I found that the firmwares (both…
-
We want to eventually port this to run natively on the MEGA65 for flashing the MEGA65 keyboard Lattice CPLD.
I assume LLVM-MOS will be the compiler of choice, since we need C++
It needs to support…
-
esp32s3
with flash encryption enabled
usb serial jtag
-
### Background Work
- [X] Yes, I searched the [mailing list](https://groups.google.com/forum/#!forum/chipyard)
- [X] Yes, I searched the [documentation](https://chipyard.readthedocs.io/)
### Feature…
-
I recently experienced that shortly after starting CircuitPython, JTAG debugging on the Kaluga would stop. I think this may be due to #3643, though I didn't bisect it. I can work around it by making…
-
I know this isn't quite the purpose of this tool, as its name clearly mentions "dap", but I think it would be interesting if your tool could also support FTDI-based (FT232H, FT2232H, ...) JTAG probes.…
-
I would like to enable the JTAG controller on the MX.
M3: It is simple, place a pull-up resistor 4.7k to VCCIO and SPI_D/NAND_ALE/SPI_NOR_D_A
If the box has a SPI chip. Solder the resistor between p…