-
Hi!
Form this pullrequest: https://github.com/LinuxCNC/linuxcnc/pull/1172 I understand, that you are using the wj200 module to control your PI500. Could you provide some information on how to set t…
-
https://github.com/Sigma1912/linuxcnc/assets/46067220/6b697e7e-ace3-45d6-b125-af95fb13b218
-
### Discussed in https://github.com/silopolis/linuxcnc/discussions/25
Originally posted by **silopolis** August 22, 2022
Control your machine directly with your thoughts !
-
The chapter in the documentation on PID tuning, , only talk about adjusting P, I and D, but nothing about adjusting FF1 like the recipe on . Perhaps some of the information from the wiki recipe shoul…
-
https://odysee.com/@swolebro:4/linuxcnc-software-configuration:4
### old config:
- Drivers
![Screenshot1](https://user-images.githubusercontent.com/12049360/105375254-dbad6600-5c08-11eb-8d4c-ba46…
-
The debian build tool lintian discovered several typos in the source debian package. Here is a script to fix the detected issues. I do not see the point of only running it on the source repository, …
-
Hi,
i'm triying to get HAL2Arduino to work and i'm stuck at some point here.
What i have done is download HAL2Arduino-0.5 and change the pinning and stepsPerInchX/Y/Z for my machine (modAccelStepper…
-
Hello Boris Skegin,
Sorry to bother, I meet some issue when using this COMP.
I use BBB with machinekit installed, kernel version is 3.8.13-xenomai-r83.
When "loadrt pdoLIBIX2dc" prompt with erro…
-
https://ebertolazzi.github.io/Clothoids/
Download the library
git clone git@github.com:ebertolazzi/Clothoids.git —recurse-submodules
The text should be - - recursive ...
There is only one -…
-
In https://github.com/LinuxCNC/linuxcnc/pull/2643, which added new PO files, [one of the build tests](https://github.com/LinuxCNC/linuxcnc/actions/runs/6212829536/job/16863339602?pr=2643) failed with …