-
Необходимо разработать автономный дрон
1. На напечатанной раме диаметра 550 мм собрать дрон: взять моторы, винты из 7-ки
2. Соединить дрон на Pixhawk Radiolink по UART к Raspberry Pi 5 (8GB) в корпусе…
-
Hey,
I am looking for the 32.7 version for a HAKRC 35A BLHeli_32 Dshot1200 2-5S LIPO ESC.
Thanks
-
I am new to UPS PIco world. I just received 2 boards from PiModules (UPS PIco HV3.0B+ HAT Stack 450 PoE). Took a while to get them up and running. I've been making up circuits since my teenage year…
-
Please add decode of Frsky FLVSS and MLVSS Lipo sensors
-
**Describe the bug**
In Azure Pipelines CI, our pipeline breaks because the runner machines are x86_64 (intel) and not apple silicon (arm64) on v0.8.0.
v0.7.3 is x86_64 for reference. Is it possible…
-
hi, @danielcdh
I recently read the code of [LIPO](https://gcc.gnu.org/wiki/LightweightIpo) (Profile Feedback Based Lightweight IPO) in gcc and find that the theory is very good. In [this paper](h…
-
I modded my FS-i6M to use lipo's but the alarm is not working properly when set to low voltages. I have to fake a 4 cell NiMh battery uage. So I have to set the TX voltage reading 1V higher so it sees…
bgt50 updated
6 years ago
-
I used to use NiMH and everything works fine. To get more power, however, I replaced the NiMH battery with 4S LiPO. After that, I found that my car had difficulty to start. Please see the video here …
-
Any ideas?
```
# brew install msp430-libc
[...]
==> ../configure --target=msp430 --enable-languages=c,c++ --program-prefix='msp430-' --prefix=/usr/local/Cellar/msp430-gcc/4.7.0 --with-as=/usr/lo…
-
**Describe the bug**
I have a bunch of sensors working with my whoops (AIO FC - FrSky SPI).
If I disconnect the lipo and reconnect it, some of them show in RED on the telemetry page. The standard on…