-
Right now the only communication between Klipper/Mainsail and Spoolman is for getting the spool usage data and checking for Filament compatibility.
Now I would appreciate it, if there would be an p…
-
### What happened
After moonraker update I receive this error.
I host it on `Lenovo Ideacentre Stick 300 PC Mini Desktop`. I installed there `Ubuntu 18.04.6 LTS`.
Everything was running OK before …
-
Hey all.
I got the DuckPro-Kobra3 FW update (rev. 05.10.24-02) and it worked out of the box flawlessly. I was on an very old FW vers. 2.3.1.3_1.1.6. In the beginning i was **not able** to update th…
-
### Requested feature:
As per my admittedly limited understanding: Within Docker containers, processes run as root by default, but Docker allows for running in-container processes as a less privilege…
-
I had kTAMV working before, but I updated klipper and now I get an error when klipper tries to start:
"Section 'ktamv' is not a valid config section"
I've tried to re-install kTAMV with the comman…
-
Running up to date on everything, setting for timelapse both in the mainsail page and UI menu. Nothing changed in Moonraker.conf, or any other file. Timelapse status on console says disabled, tried re…
-
I am using a Filametrix on a standard bedslinger (OG Ender 3) but the X axis stepper skips at normal printing current.
I have edited the MMU_CUT_TIP macro to adjust my stepper current before and a…
-
# Must-have Mainsail, Klipper and Cura slicer configuration with Artillery Sidewinder X2 | freakyDude's Blog
Tutorial about the must-have Mainsail, Klipper and Cura slicer configuration files with …
-
### What happened
Installed RatOS 2.1 and immediately had issues with the 5160 drivers. After looking around for awhile, I noticed that the SPI pinouts in the RatOS.cfg are wrong. As of now, the SP…
-
### Is your feature request related to a problem?
Monitor tab is not usefull if you have not connected your printer via USB. Using Octorpint of Mainsail webpage to view the printing process and contr…