-
In Electrical Build.pdf:
Table 1 parts to build battery connector lists X1 (red) and X2 (black) as 16 AWG wires.
Table 3 in the same document lists X1 and X2 as 20 AWG wires.
Parts list descr…
-
## Problem
The absolute encoders used on the corner system are relatively expensive, and also require a voltage scaling solution to convert from the 0-5V analog output signal to the 0-2V scale that…
-
I am making changes to the control board and have run into the following issues:
1. Test point T3 isn't connected to anything. This appears to be a placement error in the
schematic.
2. There are…
-
@chrisl8,
I have used both the **Ubuntu MATE (focal 20.04) desktop** and the **Ubuntu focal server/gnome desktop** and have found that the combination of the Ubuntu focal server/gnome desktop is a …
-
I run the command make "px4_sitl jmavsim", it failing and giving below error I tried all solution on the internet nothing worked.
-
Roboclaw 2x7A motor drives are no longer manufactured by Pololu. Not available in Turkey.
Is there anything else you can recommend instead of this driver? We are stuck :'(
?
-
Similar to how most robot vacuums can dock themselves and recharge.
Consider using this code: https://github.com/wennycooper/mybot_autodocking/
-
Roboclaw python library error - I'm new to serial in python,but and I unders…
-
This service should return all faults currently set on any given connected roboclaw
-
var roboclaw = require("../../index").RoboClaw(0x80);
Where does this get initialize?