-
The config.json looked like it needed some more variable strings in the json list. I added a few strings to the config.json. I am mining kawpow and while updating the config.json variables that …
-
Given that this paper is about comparing coils, an obvious question when interpreting B1+ and B1- results is: how are the Tx and Rx coils distributed for each coil? We should gather this information f…
-
Here's a fun one: instead of using the Waveshare laser detector/transmitter module, make our own! It might be easier to characterize the timing required for switching and on-off transmission of the la…
-
Noticed an issue with our serializers - using lists of rx.Base is removing the outer braces:
```python
class Test(rx.Base):
key: str
value: str
comp = Test(key="1", value="text1")
print(rx.…
-
Extensive GPU benchmarks with AMD gpus can now be run by following steps after building the rocm sdk. This version has now been synced with the upstream version which has fixed the pytorch 2.0 support…
-
Hi, finaly took time to get back into this
Do you have a basic wiring diagram ? or is it as simple as plugging tx in rx and rx in tx ? i plan to use an ESP8266 or ESP32 if needed
Thanks :)
-
### The problem
Attempting to determine why parameters like div_ratio: and capacitance: have no apparent effect while tuning the as3935. Finally determined that reading the registers for these values…
-
when reading the buffer RX ( **sx126x_read_buffer** ) , if I read as many bytes as the **sx126x_get_rx_buffer_status** function says, there is random data. In order to retrieve my frame is to read 255…
-
**Describe the set-up**
* MCU: STM32F722RET6
* Complier: arm-none-eabi-gcc version 13.2.1 20231009 (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7))
* Debugger: GNU gdb (Arm GNU Toolchain 13.2.rel1…
-
### What happened?
Everything was working fine on 1.38.0-dev but since I switched to 1.39.0, z2m started crashing randomly every couple of hours.
The log shows a random crash started with a transact…