-
Here's a list of Kconfig symbols that are referenced somewhere but not defined in the (main) Kconfig tree, sorted by name and with the locations where they're referenced. If you see something you reco…
-
I am running Fastled 3.1 on a ATSAM4S4A ( 120MHz cortex M4 ) with code ported form arduino Due.
One of the _gotchas_ from this is that the SAM4S only has 16 bit timers where DUE ( 3X ) has 32 bit.
I …
-
When zephyr.git/tests/kernel/arm_irq_vector_table is run on nrf52_pca10040, usage fault occurs.
Sample log:
```
***** USAGE FAULT *****
Executing thread ID (thread): 0x20000d9c
Faulting …
-
I plan on doing up a list/table for LCD dimensions LCD_W/LCD_H for the radios... if an admin creates a place holder page for me in the appendix I'll add in the contents.. please @rcdiy me when added..…
RCdiy updated
7 years ago
-
Is it possible to use this code to update my WINC1500 through the SAMD21? I need to update to 19.5.2 to stop the socket buffer full error.
Edit: I also saw this page http://asf.atmel.com/docs/lates…
-
Move hardware setup routines out of main.c and into their respective modules.
Also, where to put generic setup functions like master clock and PIO setup (granted most PIO will be handled by specific …
-
If a '.s' file is present in the source tree, Shake throws the following exception:
```
Error when running Shake build system:
* core
* osmium
* build/osmium/osmium-atsam4s16b.bin
* build/osmi…
-
I have a mostly reproducible crash on the BMP running a build of the latest master as of this issue (b10971b), and also on v1.6. This happens with a SAM4S target, when I attempt to reconnect to the ta…
-
I am making a firmware flashing tool using bossac but I encountered a problem. Sometimes, but not always, the flashing fails if the firmware exceeds 16kB. It then looks like this:
```
Device found on…
-
It is possible to emulate FTDI chip on STM32F303. That way sparky connects as FTDI converter. FTDI driver is considerably better that ST CDC demo, it handles reset gracefully (just reconnect in config…