-
Almost everything needed should be in a bag in the DSL.
The panels will charge the batteries directly, (each panel needs a diode to protect it from reverse current if it ends up in the shade... try …
-
Would be great to have support for Solar Assistant ( https://solar-assistant.io/ ). It supports many types of inverters and the beta version has a proper power management that works fine with Growatt …
-
I have recently installed solar panel system using APSystems' ECU-C. Most of my smallish home automation is done with Node Red, but I'm keen to start using Home Assistant. I found this ECU-related com…
-
Please, where can I find the input for the current solar power for the Solar²DHW function?
In which tab ?
What is the name of the node?
Thank you very much
Edit: I forgot i am using Flow vers…
-
The Solar & Wind priority feature is available for VE.Bus inverter/chargers, prioritizing renewable power sources to charge the batteries over using the AC input.
The feature is enabled in the inve…
-
**Describe the bug**
When using an Eastron SDM630 Modbus V2 as EVMeter (probably the same when you would be using it as a MainsMet), you get a very precize (lots of digits behind the comma) power rea…
-
My single phase Zappi (EV charge point) is installed upstream of the Powerwall 3 (PW3) CT so the PW3 does not see it as a load
and therefore does not discharge to the EV
BUT the PW3 thinks that th…
-
## SPS
* https://en.wikipedia.org/wiki/Space-based_solar_power
## QianLab, CAST
…
-
The trailcam unit consists of
1. Trailcam
The trailcam needs to be connected to the Pi Zero. This could be done via USB cable to read out the trailcam's SD card. Wireless is another option.
3.…
-
Hi,
Just to compile a list of issues with TAC LS, which I believe are mostly centred around background resources.
1. b9 part switched solar panels (e.g. from near future solar) aren't recognis…