-
There are `.zip` files in this repo like `Probes/KlickyNG/STL/KlickyNG_Probe.zip` which contain various `.stl` files and then there are `.stl` files directly in those same folders like those `.zip` fi…
-
This is still very rough, but the idea is to make it easier to pipe STL data around to multiple commands. Some hypothetical examples:
# create a cube with a hole in it without any temporary fil…
-
[BFI-VT_Housing_Symmetrical_x2.stl ](https://github.com/clee/VoronBFI/blob/main/usermods/Tetsu/Symetrical%20BFI/STLs/BFI-VT_Housing_Symmetrical_x2.stl) has an M5 and an M3 hole on each side like the V…
-
I own a 3D Chameleon MK4 but haven't gotten around to installing it on my K1 since it looks like the announcement will come soon for the CFS upgrade kit for it. I'm in limbo until then as I may just i…
-
在栏目下添加了文章，使用以下判断，永远显示222
111
222
-
Hey, so i laser cut the Iris PE Switch Plate Mx 3mm and after receiving it my stabilizers & the switches fall through the thumb area because the space it too large. The shop did not enlarge that area.…
-
Im implementing the always in center style and i can't get it to be centered. Whats weird is if i rotate landscape then back portrait it is then centered like it should be.
```
```
![Issue](http://…
-
**Describe the solution you'd like**
When using the text tool to create a cut, it would be nice if you could then use the multimaterial painter to select the cut elements and colour as necessary. How…
-
## From a comment during our discussions:
---
The only "unsolved" things that we've talked about earlier, are that STL always shows up in the "Only Installed" mode, and that "Only Installed" and…
-
Since the update to 0.83.0 it is unfortunately no longer possible to upload 3D files via the web interface (tested on iOS). Only .zip files or photos (jpeg, png,...) can be selected.