-
**Describe the bug**
STM32 devices, like L5, have a USB PHY and UCPD (USB power delivery) system. We have encountered an issue wherein disabling the UCPD node (and disabling the STM provided USBPD…
-
I have been using STM32 series for years and I tend to swap between the STM32G0, STM32F0, STM32F4, STM32G4 and now the STM32C0. I have been using drivers but would love to only have a general driver t…
-
Hello,
So I'm working with STM32 MCU's and doing some HAL for those for a project of mine. I guess you're not interested in adding HAL from competing HW vendors yourself, but would you be open to P…
-
Does somebody build + flash .bin file to n32g455? I try to made it, but i bricked mcus. If someone succesfully update klipper firmware, please write something here or here: https://klipper.discourse.g…
g992 updated
2 months ago
-
### Operating System
Linux
### Board
stm32L4x2
### Firmware
Compilation to a stm32l4x2.
### What happened ?
I tried to compile stm32fs_dev driver for stm32l4x2, I configured CFG_TUSB_MCU to OPT…
-
When calling `object::build::elf::Builder::read32(...)` on an ELF file that contains different alignments in its load sections (e.g. the below), the following error is raised: "Unsupported alignments …
-
Currently the `TIM` peripheral only has a v1 version. While newer timers still seem to have the same registers and fields, some of them have extra functionality added.
I ran into this when I wanted…
-
Hi,
in the release note of the CubeG4 v1.2.0, it is mentioned:
https://github.com/STMicroelectronics/STM32CubeG4/blob/21b2f2fa52ef813c38285abb6b04636910d367c9/Release_Notes.html#L133-L137
But I…
-
Not sure if I should post it here or on the PlatformIO page, do let me know if this is not the place!
**Describe the bug**
I wanted to setup a project for STM32G431CB with the Arduino framework (t…
-
**What are you doing?**
使用EIDE构建STM32G4工程
**Describe the bug**
设置好GCC编译配置后切换到ARMC编译,再切换回GCC,链接脚本路径选项又回到了初始值
这个配置应该可以像{project}.arm.options.gcc.json一样保存,方便调试
**To Reproduce**
Steps to reprodu…
dukmu updated
8 months ago