-
The package maps is loaded silently when using `ggplot2::map_data`.
It does message about the conflicts, but it's easy to miss it and is especially annoying because it masks `purr::map`.
Is th…
-
**Describe the bug**
Barometer on Sparky 2.0 isn't recognized.
**To Reproduce**
Flash Sparky 2.0 FC with Betaflight. Barometer is grayed out in the top status symbols bar and in the sensor graph.…
-
**Describe the bug**
I tried to add a CC2500 module to a Taulabs Quanton board. That CC2500 module had been verified that it could be bind to Jumper T16 in D8 mode by using OpenSky project. And I am …
-
[TauLabs Sparky2](http://ardupilot.org/rover/docs/common-taulabs-sparky2.html) - Describe the issue/suggestion and improve the title. Please keep a link to the original article if relevant.
-
Add support for native FrSky telemetry (S.Port based X-Series receiver) using only a simple external inverter (i.e. https://github.com/TauLabs/TauLabs/wiki/User-Guide:-FrSKY-S.PORT-telemetry).
Somebod…
-
* Seen in version (release version or githash): Release-20170717: 20170715-1283f272
* On flight controller (if applicable): SR F3
Issue details:
Upon starting the wizard, all the available port…
-
We currently have autotune, which can give pretty good results. However, unfortunately one of the most frequent problems user have is failed autotunes. Likely, this is caused by vibrations of the airf…
-
* Seen in version (release version or githash): 20170717
* On flight controller (if applicable): OPLinkMini
Issue details:
Bootloop after flashing
No issue with LibrePilot or Taulabs firmwares
-
Any plans for Sparky 2 support in the future? Sparky 1.0 already done.
-
I have been working on getting smartport working on F4 targets.
Because the F4 does not natively support UART inverting, I used the taulabs inverting circuit on UART3 in an attempt to get some sor…