-
May I suggest adding a feed rate and spindle speed override? Also a button to send the machine home would be nice. And why you are at it maybe a way to zero each axis separately for setting origins.
-
Hi,
I'm using a 3040T desktop CNC machine, coupled to a TinyG controller with homing limit switches and probe facilities. All work fine using ChiliPeppr. However, I wanted to swap over to a non-int…
-
Is there a way to export the received packets from the database?
a) own packets
b) packets from a specific satellite
Any hint is very welcome.
Thanks, 73
Mike DK3WN
dk3wn updated
3 years ago
-
i think i might be missing something here,
i'm running the latest firmware on a tinyG v8 (Edge-449.01) and the lastest cncjs 1.9.22.
with JSON enabled {sso:n} is not recognized, and is not mentioned…
kbex1 updated
3 years ago
-
hello i need detailed description of pin COOL, PWM, SDIR and SPIN
there are any information at all at the page "Connecting TinyG"
and i can't find anything useful.
i have a spindle driver with input r…
-
Hi,
after every manual command over the serial console in CP, the spjs send this command:
![image](https://cloud.githubusercontent.com/assets/3763176/21011075/d33d37a4-bd4f-11e6-89a2-3c2470267609.…
-
This issue is probably related to #176. I am unable to probe on TinyG with less than 18mm/sec feedrate. I have recorded 2 probing cycles starting with F20, then F19, F18 and F17 resulting in machine f…
-
Build 3009 (Linux)
When in the Axis/Motor Tab, Axis Configuration area- trying to change a parameter, for example Travel maximum, fails silently if "270" then Apply is entered, but works if "270.0" th…
-
I am planning on turning over the source of an application to Synthoes that runs a milling machine using TinyG, however there are two issues that I really think need to be addressed before I can do th…
-
Motors can run in the incorrect direction when the motor steps per turn parameter is set after the motor has already moved. This can occur when motor parameter setup commands are re-issued on a system…