-
AFAIK, the Particle Electron does not use a SARA-U201 module, it uses SARA-U260 / U270 modules, and the 2G variant uses a G-series module.
(too bad I can't get an Electron with U201...)
-
Is there a plan to support ublox max-m10s in gps driver?
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
Hi everyone,
I have 2 gps that are written in the title. Can I use rtknavi with these and to get cm level gps signal? I tried to employ 6M for single mod, the indicator was green but there was no sig…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
Hello I've previously used a sparkfun SARA R4 shield using the UBLOX LTE Modem.
The modem works on 1.8V TTL but the sparkfun shield includes two level shifters 5V -> 3.3v and 3.3v to 1.8v feeded by…
-
### Board
[SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)](https://www.sparkfun.com/products/15136)
[SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic)](https://www.sparkfun.com/products/15005)
[SparkFun GPS Brea…