-
Hi,
currently OS-specific command-line tools or IDEs are necessary to flash diyBMS on the ESP32.
This makes the use of diyBMS impossible for non IT-savy users.
I suggest flashing the ESP32 via …
renne updated
2 years ago
-
From #71,
> @reillyeon Would it be possible to reconsider this `reconfigure()` method? Most microcontrollers boot up and start listening on a Serial port at an specific baud rate but allow for clie…
-
Dave, I have an Apple IIc and a Raspberry Pi 4 B with 8GB Ram with Raspian Buster installed. I purchased the Apple serial cable and the USB to Serial adapter cable from the links on the ADT Pro websi…
-
After installing prusalink 0.7.2 on Raspberry Pi Zero 2 itself plugged on Prusa MK2.5S+ with serial USB cable, I've noticed a layer shift phenomenon after ~2hours printing on 3 different STL files... …
-
Hello, I have this kind of use case:
A web app accesses at least two functionally different devices on serial ports. For reference, it is a serial interface to transceiver control (CAT) and Arduino…
-
Dear Developers,
I would like to propose a new feature that would allow serial consoles be accessed through VNC Console Tab.
I have some VMs that are not accessible through normal Display (VGA/XEN).
…
-
I want to use this library in my reactjs project which use Web Serial API, i think we don't need nodejs anymore
So can you help me
https://github.com/nathanjel/serialport-binding-web-serial-api
T…
-
### CircuitPython Version
```python
8.2.0
9.0.0
9.1.1
all of above tested on two RP2040 boards
also reproduced the problem on 9.1.1 on an ESP32-S3
did not reproduce on a Trinket M0
```
…
-
VIA is the primary dependency for configuration. We should try to have a method of configuration that does not rely on any external dependencies for updates. This could be accomplished by using a webs…
-
Do I need to install a memory card on the development board? Why does my web interface not display any photos while the serial port indicates that a photo is being taken and sent? Also, can I just use…