-
I'm looking to replicate your setup but with a Wemos D1 Mini instead of the Uno.
Everything looks to be working from the D1 seide, but the Pico side throws an error when the programme is run
```
…
-
Newbie alert...I have an arduino d1 mini. I added the sinric skill to alexa smart home. I uploaded code to turn the BUILTIN_LED on and off. The mini shows up on my wifi. The alexa app finds my dev…
4x1ks updated
3 years ago
-
Hi @jurriaan do you now of any compatibility issue on D1 mini?
I'm in trouble and can't get the IR working on it, don't know if it is because of limited current on pins or a timer issue (timer 0 is u…
-
Ok -- so, I'm switching over to using sinric instead of the wemos switch code.
I think I followed all the steps. I logged in, copied the API, added two switches. Then I copied your switch code an…
-
Bonjour,
Je viens de recevoir ma carte Wemos TeleInfo, et une fois mise en place j'ai le souci suivant:
Mon oscilloscope décode parfaitement les trames à la sortie de la carte, mais pas mon ESP32. A…
-
[wemos_d1.txt](https://github.com/bdring/Grbl_Esp32/files/11668478/wemos_d1.txt)
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NA…
-
[wemos_d1.txt](https://github.com/bdring/Grbl_Esp32/files/11668461/wemos_d1.txt)
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NA…
-
the problem is that if I connect the WEMOS via USB it ALWAYS load in the right way, but if I'm powering it via the 5V pin 95% of the time it fails to correctly startup requiring to press the reset but…
-
Hi,
Sorry, this is not an issue - more of a curiosity. Have you tried to use this on the wemos triple(with two relays and one wemos)? Would be a nice space saver - in my setup that is.
Been runn…
-
Hi,
build (Arduino) and flash looked good, but it dies after boot. Currently I have not much ideas how to hunt this. And hints are very appreciated.
The blink example works on this board, so environ…