-
I'd like to make it so that the Cubico dataset can be used in the Static Yaw Misalignment analysis.
-
It appears that the hub mass 190 tonnes is accounted for twice in the example provided (once in the SIMO body called hub, and again in a nodal component at end 1 of the shaft line). (On the other han…
-
**Bug description**
Since the `FlorisInterface.calculate_*_plane()` routines require using a single atmospheric condition, doing any calculations calling these also requires using a single atmospheri…
-
Q1. There are a total of seven turbines here, each separated by a distance of 520 metres. The wake trend of the first four turbines is reasonable, but the wind speed of the last three is gradually ri…
-
Hi Pete,
when I test the NREL5MW turbine using this library, in the rated wind speed, the Cp and the output power were overestimated, I don't know whether I set something wrong when i was running,…
-
We work for an energy management company and we are looking for a series of icons that pertain to energy. Specifically buildings, power towers, wind turbines, water, nuclear, etc. In this case in part…
-
### Variant
None
### Control type
None
### Control mode
None
### Description
Hi.
Is possible to use motherboard as accu charger for wind turbine based on hoverboard motor?
-
Lawrence is running these.
-
First of all, thank you very much for developing this python library that will promote the development of wind energy.
Now small wind turbines are also developing rapidly. Why is there no ****power*…
-
## Update turbine / hub height assumptions of offshore wind
Update turbine types and hub heights for offshore wind. Cost assumptions are taken from [DEA March 2022](https://ens.dk/sites/ens.dk/…