-
![微信图片_20230802134105_1](https://github.com/OpenFAST/openfast/assets/141212175/875…
-
Hi everyone, I am new to openFAST.
Currently, I want to run openFAST in a tropical situation. So I used the file in rtest "5MW_OC4Semi_WSt_WavesWN". I only changed the wave height to 16m in WaveMod …
-
Hello,
I have an issue running the 5MW test. I need to change the wind direction, which I did by changing the PropagationDir in InflowWind.dat. By just putting 0.1 or anything else, I then get the er…
-
Dear all，
I am generating my own wind data (from SOWFA) and then using FAST.Farm to run my simulation. However, there are some problems with using SOWFA (ABLsolver) to generate inflow wind.
Questi…
-
Hello,
I have some questions about WEIS (Level 1) geometry input
1. Mooring:
- When defining the line type as "chain," are the material properties of the chain pre-defined in the program?…
-
-
Hi pere,
First of all i want thank you for this open-access code and your detailed illustration of the code in your thesis, this is very helpful for me, and i believe also helpful for other newcome…
pb628 updated
1 month ago
-
Hi, I'm trying to use TurbSim to generate a .bts file to simulate a storm on openfast. Initially, I ran TurbSim, with a small grid size of NumGrid_Z = 13 and NumGrid_Z = 13 and it worked, producing a …
-
Hello
I'm trying to run NREL 5MW wind turbine Campbell examples of openfast with matlab-toolbox.
My OpenFAST version is 3.1.0.
but, the error is occurred like this:
FAST_InitiallizedALL:FA…
-
Dear all
I have some problem during simulation.The Tower Strike problem occurred in the simulation of 15m/s steady wind based on Activefloat.I don't know how to solve this problem.Here are my Setting…